What faults usually occur in cotton swab machines?

General automatic machines run at high speed every day and start at full load. After a long time, some faults will occur more or less. The cotton swab machine is no exception. What faults usually occur in the cotton swab machine?
What faults usually occur in cotton swab machines and how to deal with them?
1) The most common faults of the cotton swab machine are sticking, breaking, or breaking of the cotton sliver.
2) The cotton head produced by the cotton swab machine is large, small and fluffy.
3) The mechanical arm of the cotton swab packaging machine can not grasp the cotton swab, and the material can not be sucked into the comb, which is not neat.
4) The push column of the cotton swab packing machine is easy to jam. How to deal with it? The cause of the fault can be checked from the following aspects:
(1) . The position of the push column of the cotton swab packaging machine is asymmetric with the center of the clamp: adjust the position of the push column.
(2) . The cotton swab in the comb of the cotton swab packaging manipulator is not neat: pay attention to cleaning whether there is cotton head on the lower carriage of the fixture.
(3) There is a broken label under the clamp: clean the lower part of the clamp.
What faults usually occur in cotton swab machines and how to deal with them?
In the cotton swab machine, in addition to controlling the production conditions and processing technology of the key link of the cotton swab, it is also necessary to grasp the state and quality of the workpiece before and after the ring node of the cotton swab machine at any time, and grasp the quality change trend of the cotton swab machine process, so that the operator can take timely and effective measures to ensure that the cotton swab machine products are in good operation.